Home PRODUCTS Reducer Gearbox planetary reducer Harmonic Unit of Harmony Tester CSF-32-80-2UH

PRODUCTS

New Products

Harmonic Unit of Harmony Tester CSF-32-80-2UH

Harmonic drive reducer, a harmonic unit of the Harmonic Testing Machine CSF-32-80-2UH, is a gear drive that uses a wave generator equipped with a flexible bearing to make the flexible gear produce controllable elastic deformation and mesh with the rigid gear to transmit motion and power.

Send Inquiry

Product Description

Brand	Other brands	number	123
Specifications	CSF-32-80-2UH	Delivery	More than one month
Main purpose	Semiconductor	Application field	field Electronics
Brand	Harmonaco	Application	Semiconductor
Material	Steel	Volume	Small

Technical factors affecting the reliability of nondestructive testing are as follows:

This type of sampling inspection is called selective sampling inspection. This type of inspection does not require a stage, and only needs to repair the unqualified parts, which has no effect on the nature of the sampling inspection. Harmonaco sampling inspection machine harmonic unit CSF-32-80-2UH is at the stage level at this time. It is the criterion for whether the sampling inspection is qualified or not, so it must be stricter than the level of the sequence. In this way, the reliability of the inspection can be improved. In order to conduct sampling inspection reasonably, the sampling rate, false detection rate, missed detection rate and qualified scrapping criteria should be quantitatively studied.

Ensuring that the size of the welded structure meets the requirements of the design drawings is the criterion for the entire process of welding structure production. Since the production of welded structures is a cooperative process of multiple types of work, some dimensional errors will inevitably occur in the respective production processes of each type of work. Therefore, in order to ensure the final size requirements of the welded structure, it is very necessary to control and inspect the size of the welded structure throughout the production process. However, the structural size requirements depend on the use requirements and design requirements of the structure. Different industries and different products have their own standards, which should be determined according to specific conditions.

According to needs, the beam can be designed as simply supported, one end or both ends, rigidly fixed, cantilevered or multi-span continuous. The simply supported beam has clear force, simple structure, convenient manufacturing, installation and replacement, and is not easily affected by temperature stress. Therefore, although it consumes more materials in general, it is still widely used.