Harmonic Drive Preloaded Precision Machining Harmonic Gear CSF-17-50-2UH

Abstract 

The Harmonic Drive Preloaded Precision Machining Harmonic Gear CSF-17-50-2UH mainly consists of four basic components: the wave generator, flexible gear, flexible bearing, and rigid gear. This harmonic transmission reducer relies on the wave generator fitted with flexible bearings to induce controlled elastic deformation in the flexible gear. This allows it to engage with the rigid gear to transmit motion and power through gear transmission. The number of external teeth on the flexible gear is fewer than the number of internal teeth on the rigid gear. As the wave generator rotates, the external teeth of the flexible gear engage precisely with the internal teeth of the rigid gear along the longitudinal axis.

Specialties

It is a combination type equipped with high rigidity bearings (cross roller bearings) that are suitable for servo motors of various companies and have a one click installation feature.

High torque

Long lifespan (increased rated lifespan)

No back gap

CSF series ratio: increases torque capacity by 30%

43% increase in lifespan (10000 hours)

※ Motor matching can be confirmed through selection tools

1. Model name: CSG series

2. Models: 14, 20, 32, 45, 65

3. Reduction ratio: 50, 80, 100, 120, 160

4. Type: GH=gearbox type

5. Output shaft shape:

F0=flange output

J2=straight axis (keyless)

J6=Straight axis (with key and center screw hole)

6. The shape of the motor flange and input shaft coupling shall comply with (depending on the installation of the motor)

7. Non standard products:

● Unsigned=standard product

SP=non-standard product